Mr. Hà
live:ha_1652913-402-000-013-A1-E095-F0-G000 Vibro meter Vietnam, Proximity measuring system, CE311 - CE110i - Cảm biến độ rung Vibro meter Vietnam
Meggitt Vibrometer manufactures high quality proximity system extension cables.
All dimensions are in mm unless otherwise stated.
-
The total system length = TQ 402/412 integral cable length + Extension cable length (E).
-
When optional protection such as a flexible stainless steel hose with or without an FEP sheath is ordered: Flexible hose length (G) max. = Extension cable length (E) − 150 mm, for an extension cable that is protected to the maximum extent possible (“cable fully covered”).
Physical characteristics
Transducer construction |
: |
Wire coil Ø 8 mm, Torlon (polyamide-imide) tip, encapsulated in stainless steel body (AISI 316L) with high-temperature epoxy glue |
|
Integral and extension cables |
: |
FEP covered 70 Ω coaxial cable, Ø 3.6 mm |
|
Connectors |
: |
Self-locking miniature coaxial connectors.Note: When connecting, these should be hand-tightened until locked. |
|
Optional protection |
|||
•Flexible stainless steel hose(protection tube) |
: |
The stainless steel hose provides additional mechanical protection but is not leak-tight. |
|
•FEP sheath(extruded fluorinated ethylene propylene) |
: |
The FEP sheath provides resistance to almost all chemicals and low permeability to liquids, gases and moisture. It is also flexible, low friction and mechanically tough. |
|
Available in Ex approved versions for use in hazardous locations |
||
|
|
Type of protection Ex i: intrinsic safety |
|
Europe |
EC type examination certificate |
LCIE 11 ATEX 3091 XII 1G (zones 0, 1, 2)Ex ia IIC T6 to T3 Ga |
International |
IECEx certificate of conformity |
IECEx LCI 11.0061XEx ia IIC T6 to T3 Ga |
North America |
CCSAUS certificate of compliance |
1514309 Class I, Divisions 1 and 2, Groups A, B, C, DEx ia |
|
|
|
|
|
|
Type of protection Ex nA: non-sparking apparatus |
|
Europe |
Voluntary type examination certificate |
LCIE 11 ATEX 1010 XII 3G (zone 2)Ex nA II T6 to T3 Gc |
International |
IECEx certificate of conformity |
IECEx LCI 11.0063XEx nA II T6 to T3 Gc |
North America |
CCSAUS certificate of compliance |
1514309 Class I, Division 2, Groups A, B, C, D |
