4511-display-pr-electronic-vietnam.png

4511 Display Pr Electronic Vietnam

Hãng sản xuất: PR Electronics Vietnam

Liên hệ tư vấn

Mr. Hà

ha@pitesco.com

0392.407.993

live:ha_1652

4511 Display Pr Electronics , 4511 Display Pr Electronics Vietnam, 4511 Display Pr Electronics Viet nam

Pr Electronics, Pr Electronics VIetnam , Pr Electronics Viet Nam .

Communication enabler

  • Programming display for system 4000 and 9000 devices

  • Modbus RTU protocol interface over RS-485

  • Monitor process value from the built-in display

  • High 2.5 kV isolation to host unit

  • Shielded RJ45 connector on top

Application

  • The 4511 detachable display adds Modbus RTU RS-485 serial communications to all current and future 4000/9000 units.

  • The unit converts a wide array of sensors and analog device signals measured by the system 4000 like uni- and bipolar mA and voltage signals, potentiometer, Lin. R, RTD and TC, to a Modbus communication line signal.

  • When mounted on a system 9000 device any signal coming from or going to I.S. classified area, like AI, AO, DI and DO signals, can be converted to a Modbus network.

  • All individual unit operating parameters can easily and quickly be configured by using the Modbus communication or by using the front display menu.

  • The easily readable 4511 display can be used to read the process signal, simulate the output signal, indicate sensor errors and internal device errors.

Technical characteristics

  • 4511 has full 4501 functionality for unit programming, process signal monitoring and diagnostics handling.

  • Modbus RTU protocol is supported using a serial RS-485 communication wiring.

  • Multidrop half-duplex connection via shielded RJ45 connector.

  • High safe galvanic isolation of 2.5 kVAC between the serial wiring and the connected system 4000/9000 units.

  • Modbus parameters such as address, baud rate, stop bit(s), and parity bit are configured from the 4511 display, which also stores parameters.

Mounting / installation / programming

  • Mounting in Zone 2 / Div 2.

  • The 4511 can be moved from one device to another. The individual system 4000/9000 unit configuration of the first device can be saved and downloaded to subsequent devices.

  • Programmed parameters can be protected by a userdefined password.

  • When mounted on devices that are installed upside down, a menu item allows the display on the 4511 to be rotated 180o and the up/down buttons to switch function.