clearpoint®-high-pressure-filter.png

CLEARPOINT® high pressure filter

Xuất sứ: UK

Nhà cung cấp: PITES

Hãng sản xuất: BEKO

Liên hệ tư vấn

Mr. Hà

ha@pitesco.com

0392.407.993

live:ha_1652

CLEARPOINT® high pressure filter, 100 to 500 bar

The higher the pressure is, the higher the requirements are for compressed air filtration. With a very robust housing and high temperature resistance of up to 120°C, CLEARPOINT high pressure filters provide a variety of technical and economical advantages for reliable separation of solid contaminants, aerosols, oil vapours and odours.
Piston compressors cause pulsations in the compressed air flow based on their system designs. The resulting vibrations can cause conventional filter housings to leak. CLEARPOINT filter housings have a special locking system and therefore remain leak proof.  

 

Quality in every detail

The housing, filter element caps and support cylinders of our high-pressure filters are made of stainless steel - for good reasons: This design enables us to prevent corrosion and guarantee exceptionally long service life, even with aggressive condensates. CLEARPOINT high pressure filters are available for the pressure stages 100, 350 and 500 bar, optionally with manual drain off and differential pressure manometer. The perfect solution for every requirement.  

The CLEARPOINT high pressure filters for 100 to 500 bar are available in different degrees of filtration:

 

Filtering degree  Particle size
Coarse Filter C  25 μm
Coarse Filter G  5 μm
Coarse Filter F  1 μm
Coarse Filter S  0,01 μm
Activated carbon filter  Oil vapour, odours
Advantages of CLEARPOINT® high pressure filters

 

No corrosion, no impairment of filter performance, no "seizing" of the threads

All metallic components are made of stainless steel as standard

 

Determination of economic element change

Standard (as of S045) with connection for differential manometer

 

Element change even in confined spaces

Element connection is either executed with screw thread (up to S040) or with plug-in connection (as of S045)

 

Additional protection against loosening of the housing screw connection by pulsating volume flow

Lateral clamping screw prevents leaks

 

Consistent documentation for traceability

Approval certificate according to DIN EN 10204. Embossed serial number on housing

 

Housing O-ring radial sealing

Advantage: no destruction of the O-ring when exchanging elements (danger when with utilising axial O-ring seals). Supports setting behaviour of the gasket. No leaks

Technical data CLEARPOINT® HP
Volume flow  40 – 4420 m³/h
Maximum operating pressure  100, 350, 500 bar [ü]
Housing  stainless steel 1.4301
Permissible operating temperature:  Generally max. + 120 °C
   (HP350S075 und HP350M010 max. + 60 °C)
   Design with differential manometer maximum + 80 °C