dg-k-serie-proton-vietnam-thiet-bi-do-duong-kinh-cap-proton-ptc-vietnam.png

DG-k Serie_Proton Vietnam, Thiết bị đo đường kính cáp, Proton PTC Vietnam

Xuất sứ: UK

Hãng sản xuất: Proton

Liên hệ tư vấn

Ms. Trinh

trinh@pitesco.com

0914.738.179

trinh trinh

DIAMETER MEASUREMENT 
InteliSENS® DG-k Series Diameter Gauge
Catalogue
Series Brochure

Introduction

Proton Products InteliSENS® DG-k series dual and triple-axis diameter gauges are super fast, with scan rates of 1000 to 12500 scans/second/axis, providing outstanding product quality supervision.
Using LED light sources, high-speed Digital Signal Processing (DSP) and specialized optical design to measure, control, inspect, alarm and report diameter as well as Surface Quality Defects (SQD) as they happen, reducing customer complaints and improving your reputation as a quality product supplier.
The LED light sources cover the complete circumference of the product and any change in the diameter is immediately detected by the CCD optical receiver, measuring, controlling, alarming and reporting the diameter as well as the height, length and location of lumps and necks (if the SMFD option is purchased) along and around the product.
Extremely easy to install, integrate and use, InteliSENS® DG-k Series super fast diameter gauges can be used as a stand-alone device or integrated with production line PLCs. Optional audio/visual alarm units, fault printers and data logging PC software are available to complement the diameter gauge and close the loop on quality control.
Applications include production processes such as insulation extrusion and jacketing, wire drawing, quality control during rewinding and coiling, and rubber and plastic extrusion processes for hose, tube and pipe production.

Operating principle

The Proton Products InteliSENS® DG-k series of diameter gauges illuminate each axis of the measured object with light from a LED light source. The measured object obstructs part of the light which is then imaged onto a CCD detector array. Analysis of the pixel data from the CCD yields the object diameter. As this system is entirely solid state, it provides a very fast measurement rate together with the reliability and robustness of a system free from moving parts.
The high measurement rate of the InteliSENS® DG-k series also enables it to function as a lump and neck flaw detector at medium line speeds (< 500 m/min) when purchased with the high speed (12.5k) and SMFD (Single Measurement Flaw Detection) options.

Specifications

InteliSENS® DG2015-k 15mm Diameter Gauges

Model: DG2015-5k/ DG2015-12.5k/ Units
 
 
 
Number of axes: 2/ 2/-      
Scan rate: 5000/ 12500 Scan-S-Axis      
Cumulative scan rate: 1000/ 2500  Scan-S      
Update time: 100/ 80 µs      
Maximum weight: 3.4 kg