electromagnetic-fan-clutch-3-speed-version-ly-hop-quat-dien-tu-phien-ban-3-toc-do.png

Electromagnetic fan clutch 3-speed version-Ly hợp quạt điện từ phiên bản 3 tốc độ

Nhà cung cấp: Pitesco Việt Nam

Hãng sản xuất: KENDRION

Liên hệ tư vấn

Mr. Trí

tri@pitesco.com

0912 300 549

3-speed version

3-speed

 

Very low speed: When both electromagnetic clutches are deactivated, the fan blade runs at a speed below 100 RPM, owing to the interior friction conditions.

Medium speed: When the inner electromagnetic clutch is activated via the first temperature sensor, the fan blade can reach speeds of up to 1,200 RPM by means of a contact- and
wear-free operating eddy current system.
 

1:1 ratio: When the outer electromagnetic clutch is activated via the second temperature sensor, the fan blade runs synchronous with the drive pulley

Specifications and technical data

Information 2-speed version 3-speed version
Transferable torque: Up to 2,000 Nm Up to 400 Nm
Diameter of driven fans: Up to approx. 2,000 mm Up to approx. 1,200 mm
Supply voltage: 12 or 24 V 12 or 24 V

Efficient engine cooling means saving fuel

The primary units of Kendrion engine-cooling systems are electronically controlled electromagnetic fan clutches, available in 2- and 3-speed versions. These clutch systems enable
demand-meeting engine cooling to be realized by reducing to the required fan speed. That directly leads to cutting fuel costs at optimum efficiency.

Accurate heat removal depending on individual output curve

Depending on the application, the design of the fan clutch adapts to the customer‘s output curve and can thus ensure accurate, very swift heat removal: Within 0.5 seconds the fan is fully engaged, and thus draws off heat immediately. The maximum engine power is always available.