
FSK01, Model FSK01, FSK01 Tecsis, Test Equipment for Measuring of Electrode Forces Tecsis Việt Nam
Nhà cung cấp: pites
Hãng sản xuất: Tecsic
Mr. Hà |
![]() ![]() |
![]() |
|
![]() |
|
Ms Nguyệt |
![]() ![]() |
![]() |
|
![]() |
![]() |
Đang online | 217 |
![]() |
Lượt truy cập | 42291195 |
FSK01, Model FSK01, FSK01 Tecsis, Test Equipment for Measuring of Electrode Forces Tecsis Việt Nam
Nhà cung cấp: pites
Hãng sản xuất: Tecsic
The test set can be used to check electrode force in spot-welding equipment. The test set consists of a load cell and a display unit. To check the forces acting between the electrodes, the load cell is held between the electrodes. The concave force transfer surfaces centre the load cell. When the welding electrodes come together, the magnitude of the applied force can be read off on the display unit. The load cell is of shear force construction and therefore insensitive to transverse forces and torques. It has a measuring range of 0…10 kN. The output signal is connected to the handheld display unit via a cable. This display unit carries the voltage supply for the transducer. Alternatively, the supply can be taken from a PLC.
The proven tecsis thin-film sensors are implanted in this type of load cell too. The sensor, which is welded in via laser, has all advantages of the conventional bonded foil strain gauges, but without having their substantial disadvantages (temperature drifts of the glue and creeping
Measuring range
10 kN; 20 kN
CÔNG TY TNHH KỸ THUẬT CÔNG NGHỆ VÀ DỊCH VỤ TIÊN PHONG
Add: Số nhà 21, đường số 12, khu nhà ở Vạn Phúc 1, Tổ 10, khu phố 5, Phường Hiệp Bình Phước, Thành phố Thủ Đức, Thành phố Hồ Chí Minh, Việt Nam.
Tel: +84-8.3517 6474 /75 - Fax: +84-8.3517 6476 - HotLine: 0914643179
Email: ha@pitesco.com