Support| EN38 SC Semi-hollow shaft |  |
|
| Available pulses | 5 ÷ 3,600 ppr |  |
| Max. rotating speed | momentary 8,000 rpm continuous 6,000 rpm |
|
| Fixing | with elastic flange or anti-rotation pivot | |
| Shaft Ø mm | 5 - 6 - 8 | |
| Power supply | 5 ÷ 28 V ± 5% | |
| Protection class | IP 65 | |
| Output signals | LINE DRIVER / PUSH-PULL | |
| Max. frequency | 120 kHz | |
| EN38 ON Standard fixing | |
|
| Available pulses | 5 ÷ 3,600 ppr |  |
| Max. rotating speed | momentary 8,000 rpm continuous 6,000 rpm |
|
| Centering Ø | 33 mm | |
| Fixing | no. 4 screws M3 at 90° | |
| Shaft Ø mm | 6 - 8 | |
| Power supply | 5 ÷ 28 V ± 5% | |
| Protection class | IP 65 standard IP 67 optional | |
| Output signals | LINE DRIVER / PUSH-PULL | |
| Max. frequency | 120 kHz | |
| EN38 MN Double fixing system | |
|
| Available pulses | 5 ÷ 3,600 ppr |  |
| Max. rotating speed | momentary 8,000 rpm continuous 6,000 rpm |
|
| Centering Ø | 20 mm | |
| Fixing | no. 3 screws M3 at 120° no. 4 screws M3 at 90° |
|
| Shaft Ø mm | 6 - 8 | |
| Power supply | 5 ÷ 28 V ± 5% | |
| Protection class | IP 65 standard IP 67 optional | |
| Output signals | LINE DRIVER / PUSH-PULL | |
| Max. frequency | 120 kHz | |
| EN38 FN Fixing by threaded nut | |
|
| Available pulses | 5 ÷ 3,600 ppr |  |
| Max. rotating speed | momentary 8,000 rpm continuous 6,000 rpm |
|
| Fixing | by threaded nut M18x1 | |
| Shaft Ø mm | 6 - 8 | |
| Power supply | 5 ÷ 28 V ± 5% | |
| Protection class | IP 65 standard IP 67 optional | |
| Output signals | LINE DRIVER / PUSH-PULL | |
| Max. frequency | 120 kHz | |
| EN38 BB With square flange | |
|
| Available pulses | 5 ÷ 3,600 ppr |  |
| Max. rotating speed | momentary 8,000 rpm continuous 6,000 rpm |
|
| Centering Ø | 20 mm | |
| Fixing | no. 4 holes Ø 3.2 mm | |
| Shaft Ø mm | 6 - 8 | |
| Power supply | 5 ÷ 28 V ± 5% | |
| Protection class | IP 65 standard IP 67 optional | |
| Output signals | LINE DRIVER / PUSH-PULL | |
| Max. frequency | 120 kHz |
|
