Magnetic Stirrer PCE-MSR 405
Order no.: PCE-MSR 405
- 5 stirring points
- Adjustable up to 1500 rpm
- Maximum 120°C / 248°F
- Stirrable 5 x 400 ml
- Timer and pulse function
- RS232 interface
Specification
Magnetic stirrer with heating up to 400 ml / 5 stirring points / Adjustable up to 1500 rpm / Temperature control up to 120°C / 248°F possible / timer function / pulse mode
The magnetic stirrer PCE-MSR 405 is equipped with a heater. Thus, the magnetic stirrer with heating, liquids can heat up to 120°C / 248°F and mix or stir at the same time. The magnetic stirrer PCE-MSR 405 with heating has 5 stirring points, so that several liquids can be stirred simultaneously in the laboratory during a test. The maximum volume is per agitator at 400 ml, with heating up to 2000 ml altogether. The heating temperature can be adjusted step by step in 1°C / 1.8°F increments. The stirring speed can be changed in 10 rpm per setting up to a maximum of 1500 rpm.
In addition to the continuous stirring function, the magnetic stirrer with heating can perform a time-controlled stirring. Furthermore, there is the magnetic stirrer, the stirrers clocked to stir. This means that the motors start up for a moment and then go out again. The motors of the magnetic stirrer with heater are low-wear brushless motors. The magnetic stirrer can be operated with 230V and 110V mains voltage.
- 5 stirring points
- Adjustable up to 1500 rpm
- Maximum 120°C / 248°F
- Stirrable 5 x 400 ml
- Timer and pulse function
- RS232 interface
Specification
Drive the stirring points | Brushless motors |
Number of stirring points | 5 |
Max. Stirring quantity | 400 ml per stirring point |
2000 ml total | |
Adjustable speed | 300 ... 1500 rpm |
Accuracy speed | 10 RPM |
Heating temperature | Ambient temperature ... 120°C / 248°F |
Accuracy temperature | ± 1°C / 1.8°F |
Timer range | 1 ... 999 minutes - infinity |
Recommended length of stirring rods | 25 mm |
Dimensions stirring field | 456 x 118 mm / 18 x 4.6 in |
Heating capacity | 330 W (110 V) 375 W (220 V) |
Protection class | IP 42 |
Operating conditions | 5 ... 40°C / 41 ... 104°F, max. 80 rf |
Power supply / | 110V AC / 3.6A 220V AC / 1.7A |
Current consumption | |
Input | 400W |
Dimensions | 565 x 136 x 75 mm / 22.2 x 5.4 x 3 in |
Weight | About 3 kg / 6.6 lbs |
Interface | RS232 |