Model SC900, SC1100, SC1300, SC900D, SC1100D, SC1300D, SC1500D, SC1700D, SC2000D, SC2500D, SC3000D, SC2500DH, SC3000DH, SC3500DH, SC400DH Apex Dynamics Vietnam, apexdyna Vietnam đại lý hãng Apex Dynamics tại Việt Nam

OVERVIEW

3 AXES SERVO DRIVEN CNC ROBOT WITH TELESCOPIC ARM 

• 3 Axes synchronized movement CNC servo drive robot with telescopic vertical arm.
• Free tracking control programming with pulse generator.
• Rigid Structure built for steady movement and precise positioning with heavy payloads

STANDARD 14 SPARE INPUTS AND 12 SPARE OUTPUTS FOR INTERFACING WITH OTHER     ANCILLARY EQUIPMENT. EXTENSION UP TO 30 I/O ALSO AVAILABLE

1) Parts removal:
    ①.3 axes synchronized movements reduce complexity and cost to buildend-arm-tooling. 
    ②.Able to reach parts with hooks and undercuts using unconventional paths such as curves, etc..
2) Stack and array:Each cycle can handle up to 9 stack areas with individual stack formats. Can also place parts onto 100 points on the same surface.
3) Insert and grid:Each cycle can place 9 different insertion materials into the mould, fed from a single point, grid pallet, or multi-station.
4) 3D path:The robot can follow teaching point-to-point path to move. It lets the track move smoothly and shorten the cycle time. 
5) Inspection:Reject program: Detects signal from the moulding machine, set the reject partcount and places part in different area. 
Inspection program: Places part in different area for QC inspection, for examplery 100 cycles.

Test-mould program: Allows checking of parts at the beginning of each automaticmoulding cycle before cycle counter    starts. Weight program: Checks part quality  from electronic weigh scale and separates defect parts. 

Cycle counter: Counts the total number of moulding cycles. If counting good parts only, inspection cycle anddefect parts are not included in count total.