SM-960H Samwon Vietnam

• Programmable : 3Pattern 20segments program control
• RS485 transmission: Adoption of a computer communication function as a basic specification up to 1~255 ea, and free provision of a monitoring program(use of 20 ea) for demonstration
• Convenient touch button
• Multi Input : Thermocouple 8, Thermoscope resistor 2, DC voltage 2, Direct current 1, Sensor input of 14 kinds of humidity sensors, etc.
• Power failure compensation function: In case of a power failure during program control, the value just before the power failure is memorized and operation is performed after recovery of the power failure.
• Output current limitation: A function to limit the top/bottom of output current value
• Slow Start: Protection of equipment by setting a current slow start to the device subject to damage of the equipment due to generation of excessive currents as soon as the power is turned ON
• Remote: Control of this product under the same condition as other products by receiving SV values from other products
• Heater disconnection alarm and sensor disconnection alarm
• 10 kinds of alarms
• Program control section alarm
  • Manual current output: Outputting of the same currents constantly by designating an arbitrary current value
• Multi output : Electric current 2, Relay output  3, SSR output 1

Power Supply

• 100~240AC(power range +10%)

Input

• Thermocouple : K, J, R, T, C, E, S
• Thermoscope resistor : Pt100, JPT
• Direct current Electric current , voltage : 4-20mA, 1-5V, 0-10V
• Humidity Sensor input

OUT1 | Main Output

• A relay output
  · Contact capacity : 250V AC5A, 30V DC5A
  · Contact constituent : 1C
  · Control system : PID control(setting up direction/inverse), ON/OFF control(setting up direction/inverse)

OUT2 | Auxiliary outputting based on alarms

• A relay output
  · Contact capacity : 250V AC2A, 30V DC2A
  · Contact constituent : 1A
  · Control system : ON/OFF control(setting up direction/inverse, Operated separately from OUT1)
  · 10 kinds of alarm functions

OUT3 | Auxiliary outputting based on alarms

• A relay output 　　 · Same as OUT2
• 2 kinds of section alarms

OUT4 | Electric current Main output

• SSR output
• Electric current output 　　· DC4-20mA Electric current, 1~5V Power control(setting up direction/inverse, Solw start, with a built in limit function of output upper and lower)
• Transmission output 　　 · DC4-20mA transmission output(SV transmission output, PV transmission output)
• OUT5 | Electric current auxiliary output
• Electric current output　　· DC4-20mA Electric current, 1~5V Power control(setting up direction/inverse, Solw start, with a built in limit function of output upper and lower)
• Transmission output　　· DC4-20mA transmission output(SV transmission output, PV transmission output)
• COPY control: Controlled in the same way as the current control of output 4

SIZE

Dimensions : W96×H96×L107

Panel size : W92×H92