Status Instruments Accessories, USB Configurator, USB Lead, USBX Config, USB TTX Config, 1/2" BSP Compression Fitting, 1/4" BSP Compression Fitting, RMK-1G, Phụ kiện Status, Đại lý Status Việt Nam
Xuất sứ: UK
Nhà cung cấp: Pisteco Việt Nam
Hãng sản xuất: Status Instruments
Mr. Hà
live:ha_1652USB Configuration Kit - Configuration Hardware
The USB configuration kit provides a link between the USB port of your PC or Lap-Top and all of our products that use loop communication. The product, as well as the configurator, is powered during configuration from your PC's USB port so no additional power supply is needed during the configuration process.
Free software to use with all our programmable products is available from the downloads section on our main web site.
USB Lead - For Configuration Of Our Products With A USB Port
This simple USB lead is used for configuration of our products which have our USB interface built in. The lead is used to connect the USB port of your Lap-Top or PC to the USB port in the product.
The product is powered during configuration from the USB port of your computer. This also means the product doesn't need to be wired to a power supply for configuration which is ideal for quick set up prior to installation.
Free configuration software for this product is available from the downloads section on our main web site.
This standard USB lead is required to configure all our products that have an on board USB port.
USBX Config - Atex / IECEx Approved Config Lead For SEM210X and SEM310X
In order to comply with the latest standards, a 'fuse protected shunt zener assembly' is required when configuring between the transmitter and the PC. This is to be used for configuration in the Safe Area.
USB TTX Config - ATEX / IECEx Approved Config Lead for TT200 and SEM1800 Series
In order to comply with the latest standards, a 'fuse protected shunt zener assembly' is required when configuring between the transmitter and the PC. This is to be used for configuration in the Safe Area.
USB TTX Config - ATEX / IECEx Approved Config Lead for TT200 and SEM1800 Series
In order to comply with the latest standards, a 'fuse protected shunt zener assembly' is required when configuring between the transmitter and the PC. This is to be used for configuration in the Safe Area.
Compression Fitting - 1/2" BSP Compression Fitting
These 1/2" BSP compression fittings allow for an adjustable immersion length when used with style 2 or 4 probes.
Compression Fitting - 1/4 BSP Compression Fitting
These 1/4" BSP compression fittings allow for an adjustable immersion length when used with style 2 or 4 probes.
RMK1-G - G Rail Mount Clips For In Head Temperature Transmitters
The RMK1-G allows the user to mount a in-head temperature transmitter onto a G profile DIN rail.
