Status Instruments Temperature Transmitter, SEM710, SEM106P, HTR200, SEM1300 MKII, STA206, Bộ đọc nhiệt độ, bộ truyền nhiệt độ Status Instruments, đại lý Status Instruments

HTR200 Series - Miniature Integrated In Head RTD/ Slidewire Temperature Transmitter

The HTR200 Series ‘smart’ transmitters are designed for use with RTD or Slidewire sensors. It is integrated into the MA style head making it ideal for applications where space is restricted as well as for temperature probes with short immersion lengths due to its light weight. It converts the sensor input to 4/20mA loop powered signal 

PC configuration allows the user to select RTD type, Range, Filter, units, linearization and Burnout direction, without requiring calibration equipment. Additionally, the user may read live process data when connected to the PC, this allows for sensor offset, and output alignment calibration, where the user can enter values to match the actual process and therefore reducing system errors.

SEM106P - OEM Pt100 Temperature Transmitter Board

The SEM106/P is a cost effective “smart” temperature transmitter that accepts PT100 temperature sensors and converts sensor output over a configured range to a standard industrial (4 to 20) mA transmission signal. Supplied as a circuit board it is designed to be fitted into an OEM product. 

SEM710 - Programmable, with loop powered display, suitable for Pt100 and TC sensors

The SEM710 is  a new generation head mounted temperature transmitter with a built in temperature display. Ideal for indicating the process value at the point of measurement.

It has a universal input that has been designed to accept most common RTD and thermocouple sensor inputs and provide the user with a standard two wire (4 to 20) mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature. The addition of a display provides the user with instant information of the loop condition at the point of measurement. It is available in either our SCH4 ABS plastic connection head or our  SCH15 Stainless steel connector head. Both of which are available in sensor or wall mount versions.

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM710 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. 

SEM1300 MKII - HIGH PERFORMANCE DIN RAIL POWER SUPPLY

The SEM1300 MKII is a high performance switch mode power supply which is 17.5mm wideand which complements our range of DIN rail transmitters  It connects to 100 to 240 VAC  and provides an isolated       24 VDC supply @ 0.5A

STA206 - Temperature Probe With Integral Temperature Transmitter.

The STA206 is a cost effective sensor and transmitter assembly housed in a 316 Stainless Steel body with an integral Pt100 sensor, transmitter and DIN connector. It has a standard process connection of 1/2" BSP and a sensor stem diameter of 6mm. Immersion length needs to be specified at time of order.
The integrated temperature transmitter is based around our SEM206P. PC configuration allows the user to select range, units and burnout direction, without requiring calibration equipment. Configuration is performed quickly using our USB port driven configurator by simply connecting two clips to the STA206 loop terminals and following the software instructions. Calibration set up may be saved as a file on the PC for later use. The STA206 incorporates the latest digital technology to ensure accurate drift free performance.