weld-hole-detection-dts240-emr-m-400-delta.png

Weld Hole Detection DTS240 / EMR-M-400_DELTA

Xuất sứ: France

Nhà cung cấp: PTC

Hãng sản xuất: DELTA

Liên hệ tư vấn

Ms. Trinh

trinh@pitesco.com

0914.738.179

trinh trinh

DTS240 / EMR-M-400, Delta Sensor Vietnam, Deltasensor Vietnam, Delta chính hang, Delta chinh hang, phân phối Delta Vietnam

Weld Hole Detection

DTS240 / EMR-M-400

Catalogue DTS240/EMR-M-400

  • Large field of detection
  • Fast detection
  • No interference from ambient light
  • Adjustable Detection margin

Typical applications

The DTS240 is an optical detector. In association with the EMR-M-400 emitter, it is able to detect the weld hole made in order to locate the linking weld between two strips.

Main features

  • High speed up to 1500 m/min,
  • Use of high power LED for high detection margin
    and long life time,
  • Interference suppression by modulated light,
  • Adjustable detection margin,
  • Designed for steel industry conditions,
  • Heavy duty connectors.

Potentiometer behind back cover
for setting the detection margin

Typical installation

Receiver and emitter are fixed perpendicular to the line axis in order to take the lateral deviation of the strip into account.The following conditions have to be held for a proper detection:

  • The DTS240 field of view should completely cover the lateral position of the hole.
  • The emission of the emitter EMR-M-400 should completely cover the lateral position of the hole.
  • When there is no hole, the emitter EMR-M-400 should be completely covered by the strip regardless of the lateral deviation of the strip. For applications where the emitter is not covered completely by strip, DELTA has developed the DTR340.
  • The figure below shows a typical mounting arrangement and the table gives the field of detection for different distances between pass line and receiver / emitter.