status-instruments-rail-mounted-temperature-transmitters-sem1605-p-sem1605-tc-sem1615-sem315-mkii-sem1300-mkii-dai-ly-status-instruments-viet-nam.png

Status Instruments Rail Mounted Temperature Transmitters, SEM1605/P, SEM1605/TC, SEM1615, SEM315 MKII, SEM1300 MKII, Đại lý Status Instruments Việt Nam

Xuất sứ: UK

Nhà cung cấp: Pisteco Việt Nam

Hãng sản xuất: Status Instruments

Liên hệ tư vấn

Mr. Hà

ha@pitesco.com

0392.407.993

live:ha_1652

SEM1605/P - Pt100 Temperature Transmitter PC Programmable With Push Button Calibration

The SEM1605P is the next generation cost effective DIN rail mounted temperature transmitter from Status Instruments. It has been designed to accept most common RTD temperature sensor inputs and provide the user with a standard two wire (4 to 20) mA output signal.
 
 The SEM1605P is also provided with our USB interface to easily programme the sensor type, range and error signal. In addition user push button ranging is added, allowing adjustments at both 4 mA and 20 mA for a live value. The buttons can also be used for 4 mA and 20 mA current trim adjustment to add small offsets to the (4 or 20) mA O/P. Ideal for on site calibration without using a PC.
 
The user adjust function can be locked during configuration if not required. The state LED indicates out of range input during normal operation.

SEM1605/TC - Thermocouple Temperature Transmitter PC Programmable With Push Button Calibration

The SEM1605TC is the next generation cost effective DIN rail mounted temperature transmitter from Status Instruments. It has been designed to accept most common Thermocouple temperature sensor inputs and provide the user with a standard two wire (4 to 20) mA output signal linearised to temperature.
 
The SEM1605TC is also provided with our USB interface to easily programme the sensor type, range and error signal. In addition, user push button output adjust is added, allowing adjustments at both 4 mA and 20 mA for a live sensor value.  Ideal for on site calibration without using a PC.
 
The user adjust function can be locked during configuration if not required. The state LED indicates out of range input during normal operation.

SEM1615 - Universal Dual Input Temperature Transmitter

The SEM1615 is a universal transmitter that accepts RTD, Thermocouple, Potentiometer or millivolt input
signals and converts them to the industry standard (4 to 20) mA transmission signal. It is programmed using a standard USB lead and our free configuration software“USBSpeedlink” downloaded from our web site.

The output range and other operating parameters are easily programmed using our free software and a standard USB lead. Isolation is a standard feature to overcome any potential ground loop effects and a sensor referencing facility enables the transmitter to be calibrated to a particular sensor.

If you already know the specification you require, we can configure the product for you at no extra cost 

SEM315 MKII - Universal, Dual Input, HART Temperature Transmitter

The SEM315 is a universal programmable HART temperature transmitter which accepts most commonly used Pt100, thermocouple, mV and slide-wire sensors and generates an industry standard (4 to 20) mA transmission signal. Compatible to HART 5, 6, or 7 the product can be easily programmed using our free USB Speedlink software and a standard USB lead (safe area version). It can also be programmed via a HART communication device / system. 

Isolation is a standard feature to overcome any potential ground loop effects and a sensor referencing facility enables the transmitter to be calibrated to a particular sensor.
If you already know the specification you require, we can configure the product for you at no extra cost.
 

SEM1300 MKII - HIGH PERFORMANCE DIN RAIL POWER SUPPLY

The SEM1300 MKII is a high performance switch mode power supply which is 17.5mm wideand which complements our range of DIN rail transmitters  It connects to 100 to 240 VAC  and provides an isolated       24 VDC supply @ 0.5A